California Construction Pros
Repairs & Maintenance in Los Angeles, CA
Repair work in Los Angeles often comes back to the age of the housing, from dry rot to raised foundations that were never bolted. California Construction Pros sorts each repair into what LADBS can issue as an express permit and what needs plan check.
- Written scope before work starts
- Permits identified in planning
- Availability confirmed for your address
- Updates when decisions come up
Local considerations
Planning repairs & maintenance in Los Angeles
Foundation bolting and cripple walls
LADBS issues express permits for adding sill plate anchor bolts and plywood to cripple walls under LA City Standard Plan No. 1, for houses and residential buildings up to three stories and four units. The Earthquake Brace + Bolt program targets the same kind of work in wood-frame houses built before 1980 on raised foundations.
Rot, termite and water damage
Repairs of water damage, termite damage or dry rot below 10 percent of a residential building's replacement cost are on the LADBS express permit list. So is replacing damaged framing in single-family homes and duplexes when it stays under 10 percent of the building's replacement cost, not including decks. Larger damage needs plan review, so an early inspection helps set the right permit path.
Apartment buildings with retrofit orders
Wood-frame apartment buildings of two or more stories with ground-floor parking, built under pre-1978 codes and with more than three units, may be covered by the city's soft-story retrofit program. Check the building's retrofit status with LADBS before scheduling other structural repairs, so the two scopes can be coordinated.
Sources (4)
- California Residential Mitigation Program (Earthquake Brace + Bolt) · checked 2026-09-24
- Los Angeles Department of Building and Safety · checked 2026-09-24
- Los Angeles Department of Building and Safety (Information Bulletin P/GI 2026-003, effective 01-01-2026, revised 06-10-2026) · checked 2026-09-24
- Los Angeles Department of Building and Safety · checked 2026-09-24
Permits
Small like-for-like repairs, such as replacing trim, patching drywall or rehanging a door, often do not need a permit. Work that changes structure, rebuilds a significant part of a deck or stair, or alters electrical, plumbing, gas or mechanical systems commonly does. Requirements vary by city and county, and the local building department confirms what applies. Any required permit should be in place before that work starts.
Local permit office: Los Angeles Department of Building and Safety (LADBS)
What’s included
Repairs & Maintenance in Los Angeles, CA: scope and options
- Interior and exterior door repair: sticking doors, latches, hinges, strike plates, thresholds and weatherstripping
- Trim, baseboard and casing repair or replacement
- Small drywall and plaster patches, ready for paint
- Exterior wood repair: rotted fascia, trim, window sills and siding boards replaced, primed and sealed
- Deck and stair repair: loose boards, treads, railings, balusters and fasteners
- Caulking and sealing around tubs, showers, windows and exterior wall penetrations
- Like-for-like replacement of towel bars, shelving, cabinet hardware and closet systems
- Seasonal walk-arounds covering the exterior, gutters and downspouts, sealants and moving parts
Common options
- Single repair visit
- One defined problem, such as a failed door threshold or a cracked stair tread, scoped and fixed in one trip when the parts are on hand.
- Repair list visit
- You send a list, we review it with photos or a walk-through, group items by area and material, and plan one or more visits to work through it in order.
- Seasonal maintenance plan
- A recurring spring and fall check of the exterior, wet areas and moving parts, with a written list of what needs attention now and what can wait.
- Pre-sale or move-in punch list
- Repairs drawn from a home inspection report or a walk-through before listing or moving in, ordered by safety first and then by what buyers or occupants will notice.
- Rental or commercial turnover repairs
- Wall, door, trim and fixture repairs between tenants, planned around move-out and move-in dates.
What this service does not cover
- Electrical, plumbing, gas and HVAC repairs beyond simple like-for-like fixture swaps, which are handled by appropriately licensed trades.
- Emergency response to active leaks, fire or storm damage. Stop the source if it is safe to do so and contact your insurer first.
- Testing or removal of lead-based paint, asbestos or mold, which is done by certified specialists.
- Structural repairs to foundations, beams or load-bearing walls without an engineer's assessment when one is needed.
- Items that are not on the agreed list. New findings are written up and approved by you before any added work.
Budget planning
What affects cost
Number and spread of items
Several repairs in one area take less setup and cleanup than the same number spread across the house and exterior.
Access
Second-story trim, crawlspaces and tight attics need ladders, staging or extra protection, which adds time.
Hidden damage
Rot, water staining and insect damage often run past what is visible. Once a board or panel is opened, the scope can change, and we confirm with you before going further.
Matching existing materials
Older trim profiles, discontinued siding and custom hardware can take longer to source, or may need to be milled or adapted to fit.
Replacement material
Replacing a rotted board with primed wood, PVC or composite trim changes both the material cost and how long the repair holds up.
Finish level
Leaving repairs primed costs less than full painting and color matching, which can also need return trips for drying time.
Age of the building
In homes built before 1978, work that disturbs painted surfaces calls for lead-safe work practices, which add setup, containment and cleanup.
Scheduling
What affects the schedule
- How many items are on the list and whether they need different materials
- Special-order parts, custom trim profiles or hard-to-match materials
- Weather for exterior repairs, since sealants and paint need dry conditions and suitable temperatures to cure
- Drying time for patching compound, wood filler, primer and paint between coats
- Occupied rooms, tenants or business hours that limit when work can happen
- Whether a repair uncovers damage that needs its own scope
How to prepare
- Write down every item, even small ones, with its room or location. Photos help.
- Share any home inspection report, product manuals or paint colors you have on file.
- Clear a path to each repair and move fragile items and furniture away from the work area.
- Know where your main water shutoff and electrical panel are in case a fixture swap needs them turned off.
- Keep pets and children away from work areas while tools are in use.
- Tell us if the building was built before 1978, since that changes how painted surfaces are handled.
Process
How Repairs & Maintenance Projects Work
- 1
Consult
You send your list, photos or inspection report. We walk the items with you, flag anything that points to a larger problem, and separate urgent repairs from ones that can wait.
- 2
Plan
We group items by area and material, confirm what gets replaced and what gets patched, order parts, and give you a written scope that lists each item.
- 3
Build
Repairs are completed in the agreed order with floors and furniture protected. If opening a wall or board shows more damage, we stop, show you, and agree on the change before continuing.
- 4
Enjoy
We go through the list with you item by item, leave the work areas clean, and note anything worth watching at the next seasonal check.
Questions
Repairs & Maintenance in Los Angeles: FAQs
Can seismic bolting on my Los Angeles house be done without full plan check?
Often, yes. LADBS lists anchor bolting and cripple wall plywood per LA City Standard Plan No. 1 as express-permit work for houses and residential buildings up to three stories and four units, with or without foundation replacement.
What counts as a repair instead of a remodel?
A repair restores something to working order with similar materials, such as replacing a rotted sill or rehanging a door. A remodel changes the layout, function or finishes of a room. If your list starts to change how a space works, we will say so and scope it as a remodel instead.
Can you handle a long list of small repairs at once?
Yes. A full list is the most efficient way to use a repair visit. Send every item with photos. We group items by area and material, and a longer list may be split into more than one visit so parts and drying time line up.
Do repair visits include plumbing and electrical work?
Simple like-for-like swaps may fit into a repair visit where local rules allow. Anything that changes wiring, circuits, supply lines, drains or gas lines is handled by appropriately licensed trades and often needs a permit.
Keep planning