Tennessee Construction Pros
Repairs & Maintenance in Nashville, TN
Repair work in Nashville covers everything from porch and stair fixes to water and storm damage. Tennessee Construction Pros sorts out which repairs Metro treats as normal maintenance and which need a permit, then schedules the work in a sensible order.
- Written scope before work starts
- Permits identified in planning
- Availability confirmed for your address
- Updates when decisions come up
Local considerations
Planning repairs & maintenance in Nashville
What Metro counts as normal maintenance
Metro's definition of normal maintenance includes painting, papering, glazing windows and doors, floor finishing, minor stair and porch repairs, underpinning, and roof repairs up to 33 percent of the roof area. Work beyond that list, such as new siding or a new deck, porch or garage, needs a permit.
Water and flood damage
The May 2010 flood brought 13.57 inches of rain to Nashville in two days, and the rising Cumberland River caused tremendous damage. Before rebuilding water-damaged floors, walls or mechanical equipment, check the FEMA flood map for your address.
Repairs in historic overlays
In historic preservation districts, rehabilitation work needs a preservation permit, and the application asks for photographs and the window and door manufacturer and model. Check before replacing original porch parts, windows or doors with different materials.
Sources (5)
- National Weather Service, Nashville · checked 2026-09-24
- Federal Emergency Management Agency · checked 2026-09-24
- Metro Nashville Department of Codes & Building Safety · checked 2026-09-24
- Metro Nashville Department of Codes & Building Safety · checked 2026-09-24
- Metro Nashville Planning Department, Historic Zoning Commission · checked 2026-09-24
Permits
Small like-for-like repairs, such as replacing trim, patching drywall or rehanging a door, often do not need a permit. Work that changes structure, rebuilds a significant part of a deck or stair, or alters electrical, plumbing, gas or mechanical systems commonly does. Requirements vary by city and county, and the local building department confirms what applies. Any required permit should be in place before that work starts.
Local permit office: Metro Nashville Department of Codes & Building Safety
What’s included
Repairs & Maintenance in Nashville, TN: scope and options
- Interior and exterior door repair: sticking doors, latches, hinges, strike plates, thresholds and weatherstripping
- Trim, baseboard and casing repair or replacement
- Small drywall and plaster patches, ready for paint
- Exterior wood repair: rotted fascia, trim, window sills and siding boards replaced, primed and sealed
- Deck and stair repair: loose boards, treads, railings, balusters and fasteners
- Caulking and sealing around tubs, showers, windows and exterior wall penetrations
- Like-for-like replacement of towel bars, shelving, cabinet hardware and closet systems
- Seasonal walk-arounds covering the exterior, gutters and downspouts, sealants and moving parts
Common options
- Single repair visit
- One defined problem, such as a failed door threshold or a cracked stair tread, scoped and fixed in one trip when the parts are on hand.
- Repair list visit
- You send a list, we review it with photos or a walk-through, group items by area and material, and plan one or more visits to work through it in order.
- Seasonal maintenance plan
- A recurring spring and fall check of the exterior, wet areas and moving parts, with a written list of what needs attention now and what can wait.
- Pre-sale or move-in punch list
- Repairs drawn from a home inspection report or a walk-through before listing or moving in, ordered by safety first and then by what buyers or occupants will notice.
- Rental or commercial turnover repairs
- Wall, door, trim and fixture repairs between tenants, planned around move-out and move-in dates.
What this service does not cover
- Electrical, plumbing, gas and HVAC repairs beyond simple like-for-like fixture swaps, which are handled by appropriately licensed trades.
- Emergency response to active leaks, fire or storm damage. Stop the source if it is safe to do so and contact your insurer first.
- Testing or removal of lead-based paint, asbestos or mold, which is done by certified specialists.
- Structural repairs to foundations, beams or load-bearing walls without an engineer's assessment when one is needed.
- Items that are not on the agreed list. New findings are written up and approved by you before any added work.
Budget planning
What affects cost
Number and spread of items
Several repairs in one area take less setup and cleanup than the same number spread across the house and exterior.
Access
Second-story trim, crawlspaces and tight attics need ladders, staging or extra protection, which adds time.
Hidden damage
Rot, water staining and insect damage often run past what is visible. Once a board or panel is opened, the scope can change, and we confirm with you before going further.
Matching existing materials
Older trim profiles, discontinued siding and custom hardware can take longer to source, or may need to be milled or adapted to fit.
Replacement material
Replacing a rotted board with primed wood, PVC or composite trim changes both the material cost and how long the repair holds up.
Finish level
Leaving repairs primed costs less than full painting and color matching, which can also need return trips for drying time.
Age of the building
In homes built before 1978, work that disturbs painted surfaces calls for lead-safe work practices, which add setup, containment and cleanup.
Scheduling
What affects the schedule
- How many items are on the list and whether they need different materials
- Special-order parts, custom trim profiles or hard-to-match materials
- Weather for exterior repairs, since sealants and paint need dry conditions and suitable temperatures to cure
- Drying time for patching compound, wood filler, primer and paint between coats
- Occupied rooms, tenants or business hours that limit when work can happen
- Whether a repair uncovers damage that needs its own scope
How to prepare
- Write down every item, even small ones, with its room or location. Photos help.
- Share any home inspection report, product manuals or paint colors you have on file.
- Clear a path to each repair and move fragile items and furniture away from the work area.
- Know where your main water shutoff and electrical panel are in case a fixture swap needs them turned off.
- Keep pets and children away from work areas while tools are in use.
- Tell us if the building was built before 1978, since that changes how painted surfaces are handled.
Process
How Repairs & Maintenance Projects Work
- 1
Consult
You send your list, photos or inspection report. We walk the items with you, flag anything that points to a larger problem, and separate urgent repairs from ones that can wait.
- 2
Plan
We group items by area and material, confirm what gets replaced and what gets patched, order parts, and give you a written scope that lists each item.
- 3
Build
Repairs are completed in the agreed order with floors and furniture protected. If opening a wall or board shows more damage, we stop, show you, and agree on the change before continuing.
- 4
Enjoy
We go through the list with you item by item, leave the work areas clean, and note anything worth watching at the next seasonal check.
Questions
Repairs & Maintenance in Nashville: FAQs
Can small repairs be done without a permit in Nashville?
Yes, when they fit Metro's definition of normal maintenance, such as painting, floor finishing, glazing and minor porch or stair repairs. We check the scope against Metro's list and the property's historic overlay status before starting.
What counts as a repair instead of a remodel?
A repair restores something to working order with similar materials, such as replacing a rotted sill or rehanging a door. A remodel changes the layout, function or finishes of a room. If your list starts to change how a space works, we will say so and scope it as a remodel instead.
Can you handle a long list of small repairs at once?
Yes. A full list is the most efficient way to use a repair visit. Send every item with photos. We group items by area and material, and a longer list may be split into more than one visit so parts and drying time line up.
Do repair visits include plumbing and electrical work?
Simple like-for-like swaps may fit into a repair visit where local rules allow. Anything that changes wiring, circuits, supply lines, drains or gas lines is handled by appropriately licensed trades and often needs a permit.
Keep planning