Michigan Construction Pros
Repairs & Maintenance in Michigan

Michigan context
Planning repairs & maintenance in Michigan
One construction code, enforced locally
Michigan's construction code act and code apply throughout the state. A city, village or township can take on enforcement by ordinance. Where it does not, a county that administers the code may step in, and otherwise the state does. That is why the permit office for a project can be a city, a county or the state.
Homes still use the 2015 residential code
One- and two-family homes and townhouses up to three stories are built under the 2015 Michigan Residential Code. Updated residential and energy rules based on the 2021 editions were set to start in August 2025, but they are on hold because of a builders' lawsuit, which was still listed as ongoing in September 2026. Commercial buildings moved to the 2021 Michigan Building Code in 2025. Confirm the edition in force with the building department when you apply.
Three energy-code climate zones
Michigan's energy code climate table puts the state in zones 5A, 6A and 7. Southern Lower Peninsula counties such as Wayne, Macomb, Kent, Washtenaw, Ingham, Kalamazoo and Genesee are 5A, Grand Traverse and Marquette are 6A, and Houghton is 7. Residential energy rules are based on the 2015 IECC with Michigan amendments. Commercial energy rules are based on the 2021 IECC and ASHRAE 90.1-2019, effective April 2025.
Sources (8)
- Michigan Legislature (Stille-DeRossett-Hale Single State Construction Code Act, MCL 125.1508a) · checked 2026-09-24
- Michigan Legislature (MCL 125.1508b) · checked 2026-09-24
- City of Ann Arbor Planning & Development Services - Construction Services · checked 2026-09-24
- City of Ann Arbor · checked 2026-09-24
- Bridge Michigan (news, July 24, 2025) · checked 2026-09-24
- Home Builders Association of Michigan · checked 2026-09-24
- U.S. Department of Energy Building Energy Codes Program · checked 2026-09-24
- Michigan Energy Code 2015 (IECC-based), climate zone table as published by UpCodes · checked 2026-09-24
Permits
Small like-for-like repairs, such as replacing trim, patching drywall or rehanging a door, often do not need a permit. Work that changes structure, rebuilds a significant part of a deck or stair, or alters electrical, plumbing, gas or mechanical systems commonly does. Requirements vary by city and county, and the local building department confirms what applies. Any required permit should be in place before that work starts.
Contractor licensing
Michigan Department of Licensing and Regulatory Affairs (LARA)
Michigan licenses residential builders and residential maintenance and alteration contractors under Article 24 of the Occupational Code, which LARA administers. The license applies to paid construction, remodeling, repair or demolition work on a residential structure, meaning a one- or two-family home or a townhouse up to three stories. The law exempts some work, including jobs under $600 in total value (unless the job is split up to evade the law) and owners working on a structure for their own use and occupancy. Electricians, plumbers and mechanical contractors are licensed separately under the Skilled Trades Regulation Act. Article 24 is written for residential structures, so for commercial work, ask the building department what contractor credentials it checks at permit time. Before you hire anyone, look up the company and license type in LARA's MiPLUS license search.
Check a contractor’s status (opens the official Michigan site in a new tab)Building permits
Permits in Michigan
Building permits in Michigan come from the city, village or township that enforces the state code, or from the county or state where the local unit does not. For example, Grand Traverse County issues building permits for most of the county, while Garfield Township issues its own. Cities such as Grand Rapids issue a building permit plus separate electrical, plumbing and mechanical permits, and Grand Rapids and Ann Arbor let property owners apply for their own permits. Local historic district rules can add a review step before exterior permits. Permit needs vary by address and scope, so they are confirmed during planning, before work is scheduled.
Sources (11)
- Michigan Legislature (MCL 125.1508b) · checked 2026-09-24
- Michigan Legislature (Occupational Code, MCL 339.2401) · checked 2026-09-24
- Michigan Legislature (Occupational Code, MCL 339.2403) · checked 2026-09-24
- Michigan Legislature (Occupational Code, MCL 339.104) · checked 2026-09-24
- Michigan Legislature (Skilled Trades Regulation Act, 2016 PA 407) · checked 2026-09-24
- Michigan LARA MiPLUS (Accela Citizen Access) · checked 2026-09-24
- Historic Boston-Edison Association (summary of Detroit Historic District Commission process) · checked 2026-09-24
- City of Grand Rapids Development Center · checked 2026-09-24
- City of Ann Arbor · checked 2026-09-24
- Grand Traverse County Construction Code · checked 2026-09-24
- Grand Traverse County Construction Code · checked 2026-09-24
What’s included
Repairs & Maintenance in Michigan: scope and options
- Interior and exterior door repair: sticking doors, latches, hinges, strike plates, thresholds and weatherstripping
- Trim, baseboard and casing repair or replacement
- Small drywall and plaster patches, ready for paint
- Exterior wood repair: rotted fascia, trim, window sills and siding boards replaced, primed and sealed
- Deck and stair repair: loose boards, treads, railings, balusters and fasteners
- Caulking and sealing around tubs, showers, windows and exterior wall penetrations
- Like-for-like replacement of towel bars, shelving, cabinet hardware and closet systems
- Seasonal walk-arounds covering the exterior, gutters and downspouts, sealants and moving parts
Common options
- Single repair visit
- One defined problem, such as a failed door threshold or a cracked stair tread, scoped and fixed in one trip when the parts are on hand.
- Repair list visit
- You send a list, we review it with photos or a walk-through, group items by area and material, and plan one or more visits to work through it in order.
- Seasonal maintenance plan
- A recurring spring and fall check of the exterior, wet areas and moving parts, with a written list of what needs attention now and what can wait.
- Pre-sale or move-in punch list
- Repairs drawn from a home inspection report or a walk-through before listing or moving in, ordered by safety first and then by what buyers or occupants will notice.
- Rental or commercial turnover repairs
- Wall, door, trim and fixture repairs between tenants, planned around move-out and move-in dates.
What this service does not cover
- Electrical, plumbing, gas and HVAC repairs beyond simple like-for-like fixture swaps, which are handled by appropriately licensed trades.
- Emergency response to active leaks, fire or storm damage. Stop the source if it is safe to do so and contact your insurer first.
- Testing or removal of lead-based paint, asbestos or mold, which is done by certified specialists.
- Structural repairs to foundations, beams or load-bearing walls without an engineer's assessment when one is needed.
- Items that are not on the agreed list. New findings are written up and approved by you before any added work.
Budget planning
What affects cost
Number and spread of items
Several repairs in one area take less setup and cleanup than the same number spread across the house and exterior.
Access
Second-story trim, crawlspaces and tight attics need ladders, staging or extra protection, which adds time.
Hidden damage
Rot, water staining and insect damage often run past what is visible. Once a board or panel is opened, the scope can change, and we confirm with you before going further.
Matching existing materials
Older trim profiles, discontinued siding and custom hardware can take longer to source, or may need to be milled or adapted to fit.
Replacement material
Replacing a rotted board with primed wood, PVC or composite trim changes both the material cost and how long the repair holds up.
Finish level
Leaving repairs primed costs less than full painting and color matching, which can also need return trips for drying time.
Age of the building
In homes built before 1978, work that disturbs painted surfaces calls for lead-safe work practices, which add setup, containment and cleanup.
Scheduling
What affects the schedule
- How many items are on the list and whether they need different materials
- Special-order parts, custom trim profiles or hard-to-match materials
- Weather for exterior repairs, since sealants and paint need dry conditions and suitable temperatures to cure
- Drying time for patching compound, wood filler, primer and paint between coats
- Occupied rooms, tenants or business hours that limit when work can happen
- Whether a repair uncovers damage that needs its own scope
How to prepare
- Write down every item, even small ones, with its room or location. Photos help.
- Share any home inspection report, product manuals or paint colors you have on file.
- Clear a path to each repair and move fragile items and furniture away from the work area.
- Know where your main water shutoff and electrical panel are in case a fixture swap needs them turned off.
- Keep pets and children away from work areas while tools are in use.
- Tell us if the building was built before 1978, since that changes how painted surfaces are handled.
Process
How Repairs & Maintenance Projects Work
- 1
Consult
You send your list, photos or inspection report. We walk the items with you, flag anything that points to a larger problem, and separate urgent repairs from ones that can wait.
- 2
Plan
We group items by area and material, confirm what gets replaced and what gets patched, order parts, and give you a written scope that lists each item.
- 3
Build
Repairs are completed in the agreed order with floors and furniture protected. If opening a wall or board shows more damage, we stop, show you, and agree on the change before continuing.
- 4
Enjoy
We go through the list with you item by item, leave the work areas clean, and note anything worth watching at the next seasonal check.
Service areas
Where we plan repairs & maintenance projects in Michigan
Other communities
Questions
Repairs & Maintenance FAQs
What counts as a repair instead of a remodel?
A repair restores something to working order with similar materials, such as replacing a rotted sill or rehanging a door. A remodel changes the layout, function or finishes of a room. If your list starts to change how a space works, we will say so and scope it as a remodel instead.
Can you handle a long list of small repairs at once?
Yes. A full list is the most efficient way to use a repair visit. Send every item with photos. We group items by area and material, and a longer list may be split into more than one visit so parts and drying time line up.
Do repair visits include plumbing and electrical work?
Simple like-for-like swaps may fit into a repair visit where local rules allow. Anything that changes wiring, circuits, supply lines, drains or gas lines is handled by appropriately licensed trades and often needs a permit.
What happens if you find more damage than expected?
We stop, show you what we found with photos, explain the options, and write up the added work. Nothing outside the agreed list is done without your approval.
Is there anything different about repairs in an older home?
Yes. Homes built before 1978 may contain lead-based paint, and EPA requires anyone paid to disturb painted surfaces in those homes to be certified and to use lead-safe work practices. EPA also notes that older textured paints and patching compounds on walls and ceilings may contain asbestos.
Is seasonal maintenance worth scheduling?
Small problems like failed caulk, a clogged downspout or a split trim board let water in. Water damage is usually more involved to repair than the gap that caused it. A spring and fall check catches these problems while they are still small.
Ready to Plan Repairs & Maintenance in Michigan?
Share the scope and the address. We'll confirm availability and follow up to talk through options and next steps.